ISO 27001 A.6.1: employee screening under the standard
ISO 27001 asks you to screen every new hire before they start, and to keep screening them while they work for you. Control A.6.1 does not prescribe one set of checks for everyone: you match the depth of each check to the role, the information that person can reach and the risks you have identified. Pescheck is ISO/IEC 27001:2022 certified by BSI, so the personal data in your screening is handled under the same standard.
What does ISO 27001 A.6.1 require?
A.6.1 Screening is the first of eight people controls in Annex A of ISO 27001:2022. In the 2013 version it was control A.7.1.1. ISO 27001:2013 certificates expired on 31 October 2025, so every audit now tests A.6.1.
In plain terms, the control asks you to:
- Run background verification checks on candidates before they join, and on an ongoing basis afterwards. The ongoing part is new compared with 2013.
- Respect the laws, regulations and ethics that apply where you hire, including privacy law such as the GDPR.
- Keep checks proportionate: to your business needs, to the classification of the information the person will access and to the risks you see.
The guidance in ISO 27002 adds that screening covers contractors and agency staff too, and that checks can range from identity, references, CV and qualifications to criminal record or credit checks for sensitive roles. If a check cannot be finished before the start date, limit the person's access until it is.
ISO 27001 A.6.1: which employees to screen
Screen everyone, but not everyone the same way. Group roles by the information they can reach, then set the checks per group. The table below is a starting point, your own risk assessment decides the final set.
| Role group | Access | Checks before start | Rescreen |
|---|---|---|---|
| All employees (baseline) | Internal information, email, shared drives | ID verification, reference check, diploma check where the role relies on it | On a move to a more sensitive role |
| HR, payroll and customer service | Personal data of staff or customers | Baseline + criminal record check | Every 3 years, or on role change |
| Finance and procurement | Payments, bank details, contracts | Baseline + criminal record, credit check where lawful | Every 2 to 3 years |
| IT admins and developers with production access | Systems, source code, privileged accounts | Baseline + criminal record, adverse media check | Every 2 years, and before privileged access is granted |
| Executives and board members | Strategy, M&A, all company data | Baseline + criminal record, PEP and sanctions, adverse media, credit check | Every 2 years |
| Contractors, freelancers and agency staff | Same as the role they fill | Same as the role they fill, via your supplier contract or directly | Same as the role they fill |
| Defence, government and classified projects | State or client classified information | The above + national security vetting where the client or government requires it | As set by the vetting authority |
ISO 27001 sets no rescreening interval. The intervals above are common practice, not requirements. Credit and criminal record checks process sensitive personal data, so only run them where the role justifies it and local law allows it.
What evidence does an auditor ask for?
Auditors usually take a sample of recent hires from your HR system and ask you to show how each one was screened. Have these ready:
- A screening policy that names your role groups, the checks per group and who approves the outcome.
- A link to your risk assessment, showing why each role group gets the checks it gets.
- Your Statement of Applicability, with A.6.1 marked as applicable and a reference to the policy.
- A record per person: which checks ran, on what date, the outcome and who signed off. Keep the consent or privacy notice the candidate received.
- Contractor evidence: contract clauses that require screening, plus the supplier's confirmation that it was done.
- An exceptions log for anyone who started before screening was complete, with the access limits you put in place.
- Rescreening proof: the schedule and the records showing it actually ran.
Don't keep full screening reports longer than you need them. The record of what ran is usually enough. Delete screening data in line with your retention policy and the GDPR.
When to rescreen employees
ISO 27001:2022 asks for screening on an ongoing basis, not just at the door. The standard leaves the timing to you, so write your triggers into the screening policy. Common triggers are:
- A move to a more sensitive role, such as a promotion into finance, IT administration or management.
- New privileged access, for example admin rights to production systems.
- A fixed interval for high-risk role groups, often every 2 to 3 years.
- A security incident or new information that raises doubt about someone's integrity.
- Contract renewal for long-term contractors and freelancers.
Tell employees in advance that rescreening is part of the job, and why. In-employment screening with Pescheck lets you rescreen current staff with the same checks you use for new hires.
ISO 27001 screening with Pescheck
Pescheck runs the checks from the table above in one platform, so every hire gets the right checks for their role group, and you keep one record per person for your auditor.
- Checks per role group: set up a screening package for each group once and reuse it for every hire.
- Ongoing screening: rescreen current staff with in-employment screening.
- A certified supplier: Pescheck is ISO/IEC 27001:2022 certified by BSI. That helps you meet your own supplier controls too, because the people data you share with us is handled under the same standard.
Our security officer WE CARE ABOUT DATA SECURITY
What does the ISO 27001 standard expect?
An organisation's information security management system (ISMS) is established, put into place, kept up to date, and continually improved, according to the ISO/IEC 27001 standard. According to this widely recognized global security standard, Pescheck must:
- Systematically assess our information security risks, taking into consideration the impact of threats and vulnerabilities
- We create and implement a thorough set of information security controls and other risk management techniques
- We have a comprehensive management approach in place to make sure that the information security controls consistently satisfy our requirements
What does this mean for our clients?
As a result of this certification, we can assure you that data is secured in accordance with the highest standard and that our dashboard is reliable. This way you have more time to focus on the things that really matter, like staff recruitment. This ensures the following:
That customer data is rigorously protected
We assess, minimize and eliminate risks and vulnerabilities
That we strive for operational excellence regarding our IT, HR and information processes
Certification
Independent third-party auditors perform the certification. Our compliance with this internationally-recognized standard and code of practice is evidence of our commitment to information security. To view Pescheck's certification, use the following link to our BSI certificate profile. Or go to the Certificate and Client Directory search on the British Standards Institution (BSI) website, to view the certification.
Verify our certificate at BSI
ISO 27001 A.6.1 screening: frequently asked questions
Yes. A.6.1 applies to every candidate, but the depth of the checks should match the role. A receptionist and a system administrator do not need the same screening.
It was control A.7.1.1 Screening. In the 2022 version it moved to the people controls and now also asks for ongoing screening.
Yes, if they get access to your information or systems. You can screen them yourself or require the supplier to do it in the contract and keep proof that it happened.
The standard sets no fixed interval. Base it on risk: many organizations rescreen high-risk roles every 2 to 3 years and anyone who moves into a more sensitive role.
Yes, if each check has a lawful basis and is proportionate to the role. Criminal record data may only be processed where EU or national law allows it, so check the rules in each country where you hire.
Limit the new hire's access until the checks are complete and log the exception. Auditors look for both.
Yes. Pescheck is certified to ISO/IEC 27001:2022 by BSI. You can verify the certificate at BSI.
Works with the HR software you already use
Order screenings from inside your ATS or HR system. Pescheck connects with 160+ systems, so candidates never leave your workflow.
Browse all integrations